October 4, 2026
Retrofitting an Old System With Modern Heads
You may not need a new sprinkler system to get better coverage and lower water use. Here is how a head retrofit works on…
Read More →Sprinkler & Irrigation Guides for Dallas Homeowners
October 4, 2026
Drip Emitters Clogging: Causes and Fixes
Clogged emitters are the most common drip irrigation complaint. Here is why they clog in Dallas beds and how to clean, replace, and prevent…
Read More →
October 4, 2026
Backflow Testing: Who Can Test and When It Is Required
Backflow assemblies on sprinkler systems need periodic testing by a qualified tester. Here is what a test involves, who can perform it, and when…
Read More →
October 4, 2026
Standing Water After Watering: Irrigation or Drainage Problem?
Puddles after the sprinklers run can come from overwatering, a leak, low-head drainage, or poor grading. Here is how to tell which one you…
Read More →
October 3, 2026
Protecting Backflow Preventers Before a Hard Freeze in Dallas
The backflow preventer is the part of a Dallas sprinkler system most likely to crack in a freeze. Here is how to protect it…
Read More →
October 3, 2026
Even and Odd Address Watering Days in Dallas Explained
Dallas assigns watering days by the last digit of your street address. Here is how the even and odd schedule works in practice, including…
Read More →
October 3, 2026
Mainline vs. Lateral Line Breaks: Why It Matters in Dallas
A mainline break leaks around the clock; a lateral break leaks only when its zone runs. Here is how to tell which one you…
Read More →
October 3, 2026
Rain Bird ESP-TM2 Setup Tips for North Texas Lawns
The Rain Bird ESP-TM2 is a common controller in Dallas garages. Here are practical setup tips for programs, start times, days, seasonal adjust, and…
Read More →
October 2, 2026
A Zone That Will Not Turn On: Step-by-Step Diagnosis
When one sprinkler zone stays silent, the cause could be the controller, wiring, solenoid, or valve. Here is a step-by-step way to find it.
Read More →
October 2, 2026
Why a Sprinkler Head Keeps Geysering After You Replace It
You replaced the broken head, but water still shoots up or bubbles around it. Here are the hidden causes, from cracked risers and tees…
Read More →